hp 6975 will print test page fine, but will only print one page of multi-page jobs .
This happens from both PC computers and my ipad. i have restarted my hp and installed new software i have used hp doctor which does not detect a problem. Just installed new ink. Works fine on printing one page, but the rest are blank. i am about to give up.
Error 0xc19s0023
8710 prints gibberish at top of page. Firmware and driver seem to be up to date.
This printer suddenly gave an error:
“Printer Error
There is a problem with the printer. Turn the printer Off, then On.”
Upon cycling the printer, it begins starting normally but then briefly displays a blue screen with the “power symbol” and the code B836085E. It then goes back to the Printer Error message above.
Multiple long power disconnect cycles have done nothing. At first I thought this was an issue with the Wi-Fi card (seemed to go to error when the Wi-Fi status led was flashing), but after plugging in an Ethernet cable, it’s still doing it without the Wi-Fi status lit.
Any suggestions?
an error keeps showing that there is a jam in the printer however I can't find one and I went through all the steps to reset it and still having issues. Any suggestions?
My printer stopped in the middle of a print job and declared it was in ERROR MODE. Do can I resolve the unknown error be able to print again?
Just changed out the ink cartridge on my OfficeJet Pro 8715 and now there is a code on the screen B80005EC. How can I fix this? None of the buttons seem to elicit a response.
Newly installed 4152e printer is working just fine. However the Orange Info light is on solid and doesn't turn off. Is that normal?
Hello,
I am trying to figure out why all of a sudden my printer is throwing the error:
Event: 71.02.48
I have tried rebooting the printer, unplugging and cold restarting the printer. I have checked for any jams, nothing. I have tried seeing if the carriage moves freely, it does.
I went to print something and it makes a few small clunks and then throws the Event: 71.02.48 error.
Not sure what has caused this or why?
Help... when printer showed the error message or code B89C1F4 in white on an all-blue background. Above the error message. There is an image of the on/off power button. Pressing the actual power button does nothing. No response at all. I have to unplug to get my printer to start back working until it happens again. Which could be hour or 5 hours before this error msg will appear back.
For some reason the printer will not print. It's like the computer and printer aren't talking. I can print from my phone but not my computer.
HP Envy 5878 printer does not go past the reboot login screen and won't reset. it's stuck on the HP logo screen and only goes to the first dot on the bottom and freezes.
I was having trouble scanning and I was told to uninstall the printer and reinstall. I can't get it to install. Please help. The printer is a HP Officejet Pro 8035
Hi I have an error code of 0XB866D646 when I try to print. Can anyone tell me what this refers to please?
The screen on my printer is blue with error code B305ED09. I have unplugged several times and always get the same error. How do I fix the error? Thanks.
My LaserJet Pro M401dne intermittently refuses to print and displays the "Output bin is full" and "Remove all paper from the output bin" alternating messages. This happens with no or very few pages in the bin. The model apparently does not use the "fingers" in the bin to sense paper height. I cannot find any reference in the available documentation showing what type of sensor it does use. On my printer it became so frequent I could not print more than a page or two then power off and power back on the printer and see if the message turned off.
The only possible solution I found is in this unnarrated 10+ minute video: (6) hp laserjet pro 400 m401d output bin is full remove all papers - YouTube
Most of the video is spent on disassembly and reassembly but the "fix" seems to happen at about 3:40. I performed the procedure and was amazed to see that it actually fixed the problem, for about two weeks. The printer is now failing intermittently again with the same symptoms.
I would appreciate any suggestions you can provide. Thank you.
My printer is not printing certain letters? Is this a printer or tablet laptop issue? What can I do to fix it?
When I do the "clean printhead" option and it does the cleaning, the only colors that print is black and yellow. How do I fix this? I have tried to manually clean the print heads and it still does it.
M1212nf MFP USB connected to Windows 10 Pro PC stuck in initialization loop
I bought this on 29/3/2022 but have not been able to use it properly. It doesn't connect to my laptop via wifi, I can only use USB direct connection and still it is not stable as it will become undetected from time to time. Lately it doesn't recognise the toners despite new, original tonner has been installed. Really feel frustrated with this printer. Pls. help.