My printer is stuck displaying error code OXC4EB8024 HWLMICCI2-v12. I tried disconnecting the power cord and removed the ink cartridges as suggested on a forum but it didn't fix the problem.
↧
I keep getting error code OXC4EB8024 HWLMICCI2-v12
↧
Photo 6230 Cannot clear "remove and replace cartridge" message
Cannot clear the "remove and replace" cartridge message. Been through all the power off/removal/replace/unplug options many times but to no effect. Also cleaned contacts. Tried both a new cartridge (direct from HP) and a previous one all with the same message. Wonder if it is dead, although I can print without the offending black cartridge in place.
Any suggestions before I file it under "skip"?
↧
↧
Printer off and unresponsive
Printer off and won't respond to power button. I repeatedly have to reset by unplugging both ends of the power cord? Any long term solutions so I can stop this time consuming and annoying reboot?
↧
HP Smart Tank Plus 559: control panel freaking out after setup
I just set up my new HP printer tank. I filled the ink tanks and installed the print heads as shown in the manual. But when I closed the doors the control panel is going crazy. Button n° 2, the screen, the info-button and the on/off button are lighting up the whole time. I turned off the machine, switched the power off but every time I switch on I get the same result.
↧
the information button keeps blinking on my deskjet 2652 printer
I have reviewed the other answers in the forum and to no avail.
↧
↧
HP OfficeJet Pro 6978 - jammed paper, “printer failure”, and “improper shutdown” message
This printer recently started giving all three of these error messages together. Every time I power on it says improper shutdown, and when I try to do anything it says printer failure. Also gives a message to check the tray and clear any stuck paper. I’ve dismantled everything and it’s clear. The carrier moves. I’ve restored to defaults (twice), power cycled (twice), bypassed surge protector, updated firmware, and reseated cartridges. Nothings changed it. This printer worked OK a few weeks ago, outside of a badly uneven print, but it at least worked. Any suggestions?
thanks
↧
HP M651 Screen will not go back to Home - has a creen that says print from job storage and HP advant
HP M651 Screen will not go back to Home - has a screen that says print from job storage and HP advantage. Have tried to reset Printer by turning off but does not reset the screen. How do you fix
↧
Non stampa e malgrado abbia cambiato entrambe le cartucce lampeggia la luce dell'inchiostro nero
Non stampa e malgrado abbia cambiato entrambe le cartucce lampeggia la luce dell'inchiostro nero
↧
How Can I Get the OfficeJet 8710 to Print on a 260gsm Photo Paper?
Hi,
How can I get the OfficeJet 8710 to grab/feed a 260gsm photo paper? It can print on smaller photo papers at 260gsm however, when it's A4 size, I just hear a screech when the rollers are skidding on the glossy part of the paper. When I accidentally loaded the paper to print on the matte side, the printer was able to print although at a very poor quality obviously. That confirms that the weight of the paper is no problem.
Here are the things I have already done.
- Checked the firmware and it's at the latest version already.
- Tried printing using the JPEG version but to no avail.
- Tried printing using a photo post-processing software but it wouldn't grab the paper as well.
- Set both the programme and the printer to the thickest photo paper possible but still it wouldn't grab the paper
- Placed a 300gsm card underneath the 260gsm paper to help feed the latter.
The paper weight I am using is within specification:
Note: This problem is present on both Windows 10 64-bit and Linux HPLIP.
Again, what am I missing here? Cheers
↧
↧
Printer error contact HP 0x61011bed
Printer - HP Office Jet 6700 Premium
I have this error code and followed the advice in an earlier post - essentially to do a power re-start then clean the printer contacts - but in my case the printer cartridges don't present themselves for removal when I open the cover. They just stay parked. They do move when the printer is going through it's restart motions.
I've tried other fixes such as 'clean the printer head' and 'print report' functions but the printer just reverts to the error code.
Any other advice?
Thanks
↧
Error code
Out of nowhere the HP ENVY 5020 gives an error code
↧
Printer error
Hello I have an deskjet 3772 and since the last software update I get the message "printer error" several times a day and I should switch the printer off and on again. No further errors are displayed and after the restart the device prints without errors. What can I do to prevent this error message from appearing again?
↧
I have the printer HP ENVY 5540 and I get the error code 0XC0840001. The lights are also blinking.
I have the printer HP ENVY 5540 and I get the error code 0XC0840001. The lights are also blinking. Any help?
↧
↧
setup wireless but need to print USB for work from a different computer getting an error. 4152e
I am having trouble printing via USB from my work laptop. I set up my printer wireless with my home desktop computer.
↧
Replacement of headprint on HPDesignJet T1700 series
Please Is there anyone who can assist me to fix my printer HP DesignJet T1700 series. I have bought new print heads but when I try to change the error message keep on appearing. Firstly, it was about one print head one I try to replace it, the error message is now appearing for 2 printheads.
↧
Mac 11.3.1 - HP 9015 Printer Pause
Any help to resolve this frustrating issue would be greatly appreciated... I can not get the printer to stay off pause. In attempt to resolve this, I have deleted the problem printer twice from my printer inventory found in the system preferences and then reinstalled it. Once I do this it will print fine a few times but shortly will go back on pause and it will not resume until I delete again. This is the only printer in the print system on my machine. In addition, I've tried to update the drive w/o any success. I get the message no update needed. I did update the HP Auto Smart ap. Thanks in advance!
↧
Double sided printing stopped
My printer has suddenly stopped printing double-sided. When I print, I go through the usual steps of checking properties and selecting, if not already, double-sided and flip on long edge. However when it prints, it's not double sided, but each reverse side also comes out upside down.
Not sure if it's related, but the printer also keeps sending an additional blank page - if I print a 1 page document, 2 pages come out, one being blank. I hope that is not being counted on my Instant Ink!
↧
↧
my printer is not responding from my Mac or Apple devises
I have a HP Officejet Prob 8600 Plus which has been working very well. It is connected via internet to my Mac and iPhone and iPad I cannot now print anything of any of my items. It is saying printer not responding or looking for air products.
i have read previous comments and unplugged the printer via the cable, then unplugged the cable from the plug socket and replugged everything back in and it will still not work. Can you help please?
↧
Google docs won't print (corrupted file) from mac
Hi.
Just switched my work computer from a windows to a macbook air (M1, 2020 - Big Sur). Now the printer (Color Laser Jet Pro MFP M477fdw) won't print documents from Google docs (nor spreadsheets etc), claiming the files are corrupted. I've tried exporting the files as .pdf, restarting the computer and printer, reinstalling it and updating the drivers but with no result. It used to work fine from my old computer.
Suggestions?
↧
Printer allways cleaning, printer initialized
By printing A5 sheets from manual feeder, after every page the printer would clean and reinitialize.
Not so if feeds from 2nd tray
↧